Sterilization method | Pharmaceutics

  • The ultimate goal in the manufacture of a sterile product is the absolute absence of microbial contamination.
  • Inactivation of Micro-organism (MOs) by physical or chemical means.
  • The D value is a single quantitative expression of the rate of killing of microorganisms. This is the time required for a 90% reduction in the microbial population. Hence, the time or does it takes to reduce 1000 microbial cells to 100 cells is the D value.
  • Sterilization Assurance limit (SAL): The product will be sterilized by a sterilization process sufficient to produce a probability of non-sterility of one out of 1 million containers i.e 10-6.
  • SAL= 10-6(1 viable microorganism in 106 sterilized items of the final product).
  • Whenever possible terminal sterilization is chosen,  sterilized in its final container & possible with heat-stable particles.

Sterility test

  • Sterility test is applied to the Pharmaceutical preparations that are required to sterile preparation like parenteral and ophthalmic preparation.
  • To detect the presence of viable forms of microorganisms.
  • Sterility test is carried out at aseptic condition (grade A laminar airflow cabinet)
  • The microorganism are placed in a culture medium that provides nutrition, water, and favorable temperature/condition, microorganism will grow and their presence is detected in the culture medium.
Culture media for Sterility Test in Pharmaceuitcal, ThePharmapedia, Pharmapedia, Steilization method
Culture media for Sterility Test- ThePharmapedia

Method of sterilization

Methods of Sterilization of Pharmaceutical Product, The Pharmapedia, Pharmapedia
Methods of Sterilization: Pharmapedia

A. Physical Method

 (a) Thermal (Heat) methods

i. Steam sterilization/moist heat sterilization/autoclave
  • Used for aqueous & surgical materials.
  • most widely used and reliable method of sterilization
  • The efficiency to inactivate microorganisms is dependent upon the degree of heat, the exposure time and the presence of water.
  • Sterilization is carried out using saturated steam under pressure. Saturated steam cause destruction of enzyme and other cellular component and protein.
  • Autoclaving also kills the virus
  • not suitable for rubber, plastics, and equipment that would be damaged by high temperatures
Holding temp.Holding time (minutes)Pressure
115-118 ℃30 minutes 
121- 124 ℃15 minutes 
126- 129 ℃10 minutes 
134-138 ℃3 minutes 
Holding temperature: Autoclave
ii: Dry heat sterilization/ Hot air Oven
  • Used for sterilizing glass-wares, metal surgical instruments & sterilizing non-aqueous thermo-stable liquids and thermostable powders.
  • Dry heat destroy bacterial endotoxin
  • Pyrogen can destroy at 600 degrees centigrade for 60 second
Holding temp.Holding time
160 ℃2 hrs
170 ℃1 hrs
180 ℃30 minutes
Dry Heat Sterilization: Holding Temperature

 (b) Radiation method (Gamma radiation)

  • Gamma radiation Cause ionization of DNA
  • Dose: 2.5 Mrads
  • Source of radiation:  Cobalt 60 and cesium 137
  • Many types of radiation are used for sterilization like electromagnetic radiation (e.g. gamma rays and UV-260 nm light), particulate radiation (e.g. accelerated electrons).The major target for this radiation is microbial DNA. Gamma rays and electrons cause ionization and free radical production while UV light causes excitation.
  • Radiation sterilization is generally applied to articles in the dry state; including surgical instruments, sutures, prostheses, unit dose ointments, plastic syringes and dry pharmaceutical products.

 (c) Filtration method

  • Used for thermolabile/heat sensitive Drugs
  • The size of filter medium pores to retain micro-organisms must be quite small. The 0.20- or 0.22 micrometer pore size filter media are considered to be capable of producing sterile filtrates.
  • Both clarification and sterilization of liquid preparation
  • Filtration process does not destroy but removes the microorganisms by adsorption and trapping within the matrix of the filter material.
  • The bubble point test is a popular single-point physical integrity test for disc filter membrane. A filter medium is wetted with a liquid, and test gas pressure is slowly raised until a steady stream of bubbles appears from a tube or hose attached to the downstream side of the filter and immersed in water . The pressure at which the bubbles first appear is recorded as the bubble point and is related to the largest pores in the filter medium.

HEPA (High-efficiency particulate air)- filters can remove up to 99.97% of particles >0.3 micrometers in diameter. Application of filtration for sterilization of gases.

B. Chemical Method

 (a) liquid

Hydrogen Peroxide Sterilization -oxidizing key cellular components, which inactivates the microorganisms.

Find more…

 (b) Gases

Ethylene oxide /(CH2)2O):
  • Ethylene oxide is a colorless, odorless, and flammable gas.
  • Composition: 10% Eth.Oxide+ 90% CO2
  • Cause alkylations of sulphydryl, amino, hydroxyl and carboxyl groups on proteins and amino groups of nucleic acids/DNA.
  • produce acute toxicity including irritation of the skin, conjunctiva and nasal mucosa.
  • Efficacy depends upon humidity, time of exposure, temperature of exposure, concentration of gas, nature of microorganism.
  • Limitation:  Limited ability of Ethylene oxide gas to diffuse to the innermost product (penetrability problem)
S. No.Methods of SterilizationMechanism of actionMaterial to be sterilized
1Moist Heat (steam)Saturated steam under pressure-Destruction of enzyme, cellular component & ProteinAq. & Surgical items, gloves, Aprons, Surgical dressing, Culture media
2Dry heatOven or tunnel- Oxidative damage & denaturation of proteinNon-aq. & powders, metal surgical
3GasEthylene oxide-Alkylation of essential molecules 
Vapor phase hydrogen peroxide- Oxidising the cellular content
4Radiation (cobalt-60, cesium-137)Ionization of DNA- Ionization & Free radical 
5FiltrationAdsorptionThermolabile
Sterilization process & mechanism of action

Bio-logical indicators

Biological indicators (BIs) are live spore forms of micro-organisms known to be the most resistant living organisms to the lethal effects of the particular sterilization process.

Provide the effectiveness of a given sterilization process/validation of the sterilization process.

Biological indicators are a viable cultures of known species of microorganisms.

S. No.Methods of sterilizationBiological indicator(Spores)
1Moist Heat (steam)Bacillus strearothermophilus
2Dry heatB. subtilis
3GasB. subtilus
Bacillus stearothermophilus
4Radiation (cobalt-60, cesium-137)B. pumilus
5FiltrationPseudomonas dimunuta
Biological Indicators for the sterilization process

Join Our WhatsApp Group to receive the latest updates like Pharma Job notifications, study materials, admission alerts, Pharma News, etc

Join Our Telegram Group to receive the latest updates like Pharma Job notifications, study materials, admission alerts, Pharma News, etc

Join Our Telegram Group to Download Free Books for D.Pharm, B.Pharm, M.Pharm & GPAT……….

Subscribe to our newsletter!! Sign up here

Leave a Comments here

Message us
1
Need Help?
Hello...
Have you any Inquiry? Please leave a message. Our team will reply ASA
%d bloggers like this: